Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 83)

Unified IP MIB Reference 55
53-1002549-02
draft-ietf-idr-bgp4-mibv2-12 MIB
bgp4V2NlriBest
brcdIp.3.5.1.1.9.1.7
Syntax: TruthVal Read-only Indicates whether the route is chosen as the best BGP4 route
for the destination.
bgp4V2NlriCalcLocalPref
brcdIp.3.5.1.1.9.1.8
Syntax: Unsigned32 Read-only Specifies the degree of preference calculated by the receiving
BGP4 speaker for an advertised route.
The value of the object is zero (0) where the prefix is
ineligible.
bgp4V2NlriOrigin
brcdIp.3.5.1.1.9.1.9
Syntax: Integer Read-only Specifies the ultimate origin of the path information:
•
igp(1) - The networks that are interior.
•
egp(2) - The networks learned through an Exterior
Gateway Protocol (EGP).
•
incomplete(3) - The networks that are learned by some
other means.
bgp4V2NlriNextHopAddrType
brcdIp.3.5.1.1.9.1.10
Syntax: InetAddressType Read-only Specifies the address family of the address for the border
router that is used to access the destination network.
bgp4V2NlriNextHopAddr
brcdIp.3.5.1.1.9.1.11
Syntax: InetAddress Read-only Specifies the address of the border router that is used to
access the destination network. The address is the next-hop
address received in the update packet associated with the
prefix:
•
For RFC 2545 style double nexthops, the object contains
the global scope next hop.
•
For bgpPathAttrLinkLocalNextHop, the object contains
the link local scope next hop, if it is present.
•
For bgp4V2NlriNextHopAddr, the object contains the link
local next hop, if a mechanism is developed to use only a
link local next hop.
bgp4V2NlriLinkLocalNextHopAddrTy
pe
brcdIp.3.5.1.1.9.1.12
Syntax: InetAddressType Read-only Specifies the address type for an IPv6 link local address.
The object is present only when receiving RFC 2545 style
double nexthops.
The object is present optionally in BGP implementations that
do not support IPv6. The value of the object is unknown(0)
when there is no IPv6 link local next hop present.
bgp4V2NlriLinkLocalNextHopAddr
brcdIp.3.5.1.1.9.1.13
Syntax: InetAddress Read-only Indicates the value that contains an IPv6 link local address
and is present only when receiving RFC 2545 style double
nexthops.
The object is present optionally in BGP implementations that
do not support IPv6. The length of the object is zero(0) when
there is no IPv6 link local next hop present.
bgp4V2NlriLocalPrefPresent
brcdIp.3.5.1.1.9.1.14
Syntax: TruthVal Read-only Indicates if the value is true when the LOCAL_PREF value is
sent in the UPDATE message.
The value is always true.
bgp4V2NlriLocalPref
brcdIp.3.5.1.1.9.1.15
Syntax: Unsigned32 Read-only Specifies the degree of preference of the originating BGP4
speaker for an advertised route.
bgp4V2NlriMedPresent
brcdIp.3.5.1.1.9.1.16
Syntax: TruthVal Read-only Indicates if the value is true when a Multi-Exit Discriminator
(MED) value is sent in the UPDATE message.
Name, OID, and syntax Access Description