Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 351)

Unified IP MIB Reference 323
53-1002549-02
MRP table
snMetroRingSecPortState
brcdIp.1.1.3.29.2.1.1.20
Syntax: Integer Read-only The state of the metro ring secondary port:
•
other(1) - None of the cases below.
•
preforwarding(2) - Port transmits RHP packets; port does
not transmit data packets.
•
forwarding(3) - Port transmits RHP and data packets.
•
blocking(4) - Port receives RHP packets; does not receive
data packets.
•
disabled(5) - Port is disabled from the metro ring.
snMetroRingPriPortType
brcdIp.1.1.3.29.2.1.1.21
Syntax: Integer Read-only The metro ring primary port type:
•
other(1) - None of the cases below.
•
regular(2) - Port is configured to operate on a single ring.
•
tunnel(3) - Port is configured to operate on multiple rings.
snMetroRingSecPortType
brcdIp.1.1.3.29.2.1.1.22
Syntax: Integer Read-only The metro ring secondary port type:
•
other(1) - None of the cases below.
•
regular(2) - Port is configured to operate on a single ring.
•
tunnel(3) - Port is configured to operate on multiple rings.
snMetroRingPriPortActivePort
brcdIp.1.1.3.29.2.1.1.23
Syntax: InterfaceIndex Read-only The ifIndex value of the active primary port.
snMetroRingSecPortActivePort
brcdIp.1.1.3.29.2.1.1.24
Syntax: InterfaceIndex Read-only The ifIndex value of the active secondary port.
Name, OID, and syntax Access Description