Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 256)

228 Unified IP MIB Reference
53-1002549-02
Software licensing
License information
The following object indicates the feature (license) installed on the device.
Package upgrade operation
The following objects indicate the package upgrade process on all the Brocade NetIron devices.
Name, OID, and syntax Access Description
fdryLicensedFeatureInfo
brcdIp.1.1.2.15.2
Syntax: Bits
NOTE: This object is
supported only on
the Brocade NetIron
MLX, Brocade MLXe,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron CER
series devices.
Read-only Indicates the feature or package for which the license has been
enabled on the device:
•
ospf(0)
•
isis(1)
•
bgp(2)
•
mpls(3)
Name, OID, and syntax Access Description
brcdSwPackageFname
brcdIp.1.1.2.16.1.1.1
Syntax: DisplayString Read-write Specifies the name of the release package file or the
manifest file, which includes the path that is currently
associated with the system. When the object is not used,
the value is a zero(0) length string.
brcdSwPackageLoad
brcdIp.1.1.2.16.1.1.2
Syntax: Integer Read-write Specifies the action object to upgrade the system using a
release package. The value none(1) specifies the system
comes up and not used for SET request.
The following values download the release package from a
TFTP server and upgrade the system:
•
tftpToPrimary(2)—Installs both MP and LP application
images to the primary code.
•
tftpToSecondary(3)—Installs both MP and LP
application images to the secondary code.
•
tftpToMgmtModulePrimaryIntfModuleSecondary(4)—
Installs an MP application image to the primary code
and an LP application image to the secondary code.
•
tftpToMgmtModuleSecondaryIntfModulePrimary(5)—
Installs an MP application image to the secondary
code and an LP application image to the primary
code.