Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 338)

310 Unified IP MIB Reference
53-1002549-02
VLAN extended statistics
VLAN extended statistics for VPLS
The following table contains information for the extended VLAN accounting that applies to the
Virtual Private LAN Service (VPLS) endpoint attached to the Customer Edge (CE) device.
NOTE
Use the snmp-server disable mib <mib-table-keyword> command to disable the SNMP support for
the table and use the no form of the command to re-enable the support. The overall SNMP-WALK
performance is increased when the SNMP support is disabled for the table.
brcdVlanExtStatsOutSwitchedOctets
brcdIp.1.1.3.2.8.1.13
Syntax: Counter64 Read-only The bytes count transmitted by this port classified as
belonging to this VLAN for switched packets. The value
is applicable only if the system is configured to
separately count the two types of packets. Otherwise,
it returns “0”.
brcdVlanExtStatsOutRoutedOctets
brcdIp.1.1.3.2.8.1.14
Syntax: Counter64 Read-only The bytes count transmitted by this port classified as
belonging to this VLAN for routed packets. The value is
applicable only if the system is configured to
separately count the two types of packets. Otherwise,
it returns “0”.
brcdVlanExtStatsOutOctets
brcdIp.1.1.3.2.8.1.15
Syntax: Counter64 Read-only The bytes count transmitted by this port classified as
belonging to this VLAN for both switched and routed
packets.
Name, OID, and syntax Access Description
brcdVplsEndptVlanExtStatsTable
brcdlp.1.2.15.2.2.4 None This table contains the VLAN extended statistics for
VPLS endpoints. For more information, refer to
“VPLS
endpoint2 table” .
brcdVplsEndptVlanExtStatsPriorityId
brcdlp.1.2.15.2.2.4.1.1
Syntax: PortPriorityTC None Identifies the port QoS priority. The values 1 through 8
internally map to priorities 0 through 7. The value 128
indicates that priority-level accounting is not enabled.
brcdVplsEndptVlanExtStatsInPkts
brcdlp.1.2.15.2.2.4.1.2
Syntax: Counter64 Read-only The number of valid switched and routed frames
received by the endpoint from the Customer Edge (CE).
brcdVplsEndptVlanExtStatsOutPkts
brcdlp.1.2.15.2.2.4.1.3
Syntax: Counter64 Read-only The number of valid switched and routed frames
transmitted by the endpoint to the CE.
brcdVplsEndptVlanExtStatsInOctets
brcdlp.1.2.15.2.2.4.1.4
Syntax: Counter64 Read-only The switched and routed bytes count received by the
endpoint from the CE.
brcdVplsEndptVlanExtStatsOutOctets
brcdlp.1.2.15.2.2.4.1.5
Syntax: Counter64 Read-only The switched and routed bytes count transmitted by
the endpoint to the CE.
brcdVplsEndptVlanExtStatsRoutedInPk
ts
brcdlp.1.2.15.2.2.4.1.6
Syntax: Counter64 Read-only The number of valid routed frames received by the
endpoint from the CE.
Name, OID, and syntax Access Description