Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 676)

648 Unified IP MIB Reference
53-1002549-02
Layer 4 policy table
Layer 4 policy table
The Layer 4 policy table allows you to configure Layer 4 policies and specify the ports to which they
will be applied.
snL4RealServerPortStatisticF
ailTime
brcdIp.1.1.4.24.1.1.6
Syntax: Integer Read-only This object applies only to a port whose operational state is
failed(2).
Shows the number of seconds that has elapsed since the last time
the port tried to re-establish connection with the server.
snL4RealServerPortStatisticC
urrentConnection
brcdIp.1.1.4.24.1.1.7
Syntax: Integer32 Read-only Shows the number of client connections currently on this port of the
server. A connection consists of two sessions; the client-to-server
session and the server-to-client session.
snL4RealServerPortStatisticTo
talConnection
brcdIp.1.1.4.24.1.1.8
Syntax: Counter Read-only Shows the number of client connections on the server since the last
time the ServerIron rebooted. A connection consists of two
sessions: the client-to-server session and the server-to-client
session.
snL4RealServerPortStatisticR
xPkts
brcdIp.1.1.4.24.1.1.9
Syntax: Counter Read-only Shows the number of packets that the ServerIron has received from
the server.
snL4RealServerPortStatisticTx
Pkts
brcdIp.1.1.4.24.1.1.10
Syntax: Counter Read-only Shows the number of packets the ServerIron has sent to the server.
snL4RealServerPortStatisticR
xBytes
brcdIp.1.1.4.24.1.1.11
Syntax: Counter Read-only Shows the number of bytes the ServerIron has received from the
server.
snL4RealServerPortStatisticTx
Bytes
brcdIp.1.1.4.24.1.1.12
Syntax: Counter Read-only Shows the number of bytes the ServerIron has sent to the server.
snL4RealServerPortStatisticP
eakConnection
brcdIp.1.1.4.24.1.1.13
Syntax: Integer Read-only Shows the highest number of simultaneous client connections on
the server since the last time the ServerIron was rebooted. A
connection consists of two sessions: the client-to-server session
and the server-to-client session.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snL4PolicyTable
brcdIp.1.1.4.11.1 None Layer 4 policy table.
snL4PolicyId
brcdIp.1.1.4.11.1.1.1
Syntax: Integer Read-only Specifies the ID of the policy.
Valid values: 1 – 64