Network processor mib definition, Np statistics table, Brcdnpstatstable – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 301: Brcdnpstatsifindex, Brcdnpstatsrxrawgoodpkts, Brcdnpstatsrxforwardpkts, Brcdnpstatsrxdiscardpkts, Brcdnpstatsrxmiscpkts, Chapter 20, Chapter
Unified IP MIB Reference
273
53-1002549-02
Chapter
20
Network Processor MIB Definition
In this chapter
•
•
•
NP statistics table
NOTE
The MIB objects for various Network Processor (NP) statistics supported on the Brocade NetIron
MLX, Brocade MLXe, and Brocade NetIron XMR devices. It is not supported on the Brocade NetIron
CES and Brocade NetIron CER series devices.
The Network Processor statistics table displays information about the statistics on all the POS and
Ethernet cards.
Use the show np statistics CLI command to show the Network Processor statistics.
Use the clear np statistics CLI command to clear both the CLI and SNMP statistics counters for the
Network Processor. The snmp-server preserve-statistics CLI command does not preserve the
Network Processor statistics.
Name, OID, and syntax
Access
Description
brcdNPStatsTable
brcdIp.1.14.2.1.1
None
The Network Processor table.
brcdNPStatsIfIndex
brcdIp.1.14.2.1.1.1
Syntax: InterfaceIndex
None
The interface index for the entry. This is applicable only
for the interfaces that are physically present and
operationally up.
brcdNPStatsRxRawGoodPkts
brcdIp.1.14.2.1.1.2
Syntax: Counter 64
Read-only
Shows the number of good packets received from the
MAC address.
brcdNPStatsRxForwardPkts
brcdIp.1.14.2.1.1.3
Syntax: Counter 64
Read-only
Shows the number of packets forwarded by a packet
evaluation engine on the ingress path.
brcdNPStatsRxDiscardPkts
brcdIp.1.14.2.1.1.4
Syntax: Counter 64
Read-only
Shows the number of packets flagged for discard by a
packet evaluation engine.
brcdNPStatsRxMiscPkts
brcdIp.1.14.2.1.1.5
Syntax: Counter 64
Read-only
Shows the number of miscellaneous packets received.