Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 56)

28 Unified IP MIB Reference
53-1002549-02
RFC 2933: Internet Group Management Protocol MIB
igmpCacheTable (IGMP cache table)
Use the show ip igmp group command to display information about the IGMP cache table.
The SET request is not supported for this table.
igmpInterfaceStatus 1.3.6.1.2.1.85.1.1.1.3 Yes, always returns “active”.
NOTE: On Brocade NetIron MLX
,
Brocade MLXe , Brocade
NetIron XMR , Brocade
NetIron CES, and Brocade
NetIron CER series
devices,
the constant value for this
object is active(1).
igmpInterfaceVersion 1.3.6.1.2.1.85.1.1.1.4 Yes, but read-only.
igmpInterfaceQuerier 1.3.6.1.2.1.85.1.1.1.5 Yes, but read-only.
igmpInterfaceQueryMaxRespons
eTime 1.3.6.1.2.1.85.1.1.1.6 Yes, but read-only.
igmpInterfaceQuerierUpTime 1.3.6.1.2.1.85.1.1.1.7 Yes, but read-only.
igmpInterfaceQuerierExpiryTime 1.3.6.1.2.1.85.1.1.1.8 Yes, but read-only.
igmpInterfaceVersion1QuerierTi
mer 1.3.6.1.2.1.85.1.1.1.9 No.
NOTE: This object is not supported
on the Brocade MLXe,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
igmpInterfaceWrongVersionQuer
ies 1.3.6.1.2.1.85.1.1.1.10 No.
NOTE: This object is not supported
on the Brocade MLXe,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
igmpInterfaceJoins 1.3.6.1.2.1.85.1.1.1.11 Yes, but read-only.
igmpInterfaceProxyIfIndex 1.3.6.1.2.1.85.1.1.1.12 No. Returns “0”.
igmpInterfaceGroups 1.3.6.1.2.1.85.1.1.1.13 Yes, but read-only.
igmpInterfaceRobustness 1.3.6.1.2.1.85.1.1.1.14 Yes, but read-only.
igmpInterfaceLastMemQueryInt
vl 1.3.6.1.2.1.85.1.1.1.15 Yes, but read-only.
NOTE: On Brocade NetIron MLX
,
Brocade MLXe , Brocade
NetIron XMR , Brocade
NetIron CES, and Brocade
NetIron CER series
devices,
the constant value for this
object is Global.
Object Object identifier Supported?