Ip as-path access list string table, Snipaspathaccessliststringt able, Snipaspathaccessliststring name – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual

Page 274: Snipaspathaccessliststrings equence, Snipaspathaccessliststringa ction, Snipaspathaccessliststringr egexpression, Snipaspathaccessliststringr owstatus, Ip community list string table, Snipcommunityliststringtable, Snipcommunityliststringname

Advertising
background image

246

Unified IP MIB Reference

53-1002549-02

IP AS-Path access list string table

IP AS-Path access list string table

AS-Path is a list of the other ASs through which a route passes. BGP4 routers can use the AS-Path
to detect and eliminate routing loops. The IP AS-Path access list string table contains filters that are
used to deny or permit updates received from BGP4 neighbors.

IP community list string table

This table contains the list of community strings used.

Name, OID, and Syntax

Access

Description

snIpAsPathAccessListStringT
able
brcdIp.1.2.2.16

None

IP AS-Path access list string table.

snIpAsPathAccessListString
Name
brcdIp.1.2.2.16.1.1
Syntax: DisplayString

Read-only

An index for the entry in the table.

snIpAsPathAccessListStringS
equence
brcdIp.1.2.2.16.1.2
Syntax: Integer32

Read-only

The sequence index for this entry in this table.

snIpAsPathAccessListStringA
ction
brcdIp.1.2.2.16.1.3
Syntax: Integer

Read-write

Determines what to do with the packet if its address matches this
entry:

deny(0)

permit(1)

snIpAsPathAccessListStringR
egExpression
brcdIp.1.2.2.16.1.4
Syntax: Integer

Read-write

Specifies the AS-Path information that will be permitted or denied.
This object contains a regular expression. Each character of the
regular expression string is represented by one octet.

snIpAsPathAccessListStringR
owStatus
brcdIp.1.2.2.16.1.5
Syntax: Integer

Read-write

Controls the management of the table rows. The values that can be
written are

delete(3) – Deletes the row

create(4) – Creates a new row

modify(5) – Modifies an existing row

If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are deleted immediately. The following
values can be returned on reads:

noSuch(0) – No such row

invalid(1) – Row is inoperative

valid(2) – Row exists and is valid

Name, OID, and Syntax

Access

Description

snIpCommunityListStringTable
brcdIp.1.2.2.17

None

IP community list string table.

snIpCommunityListStringName
brcdIp.1.2.2.17.1.1
Syntax: OCTET STRING

Read-only

An index for an entry in the table.
This object can have up to 32 octets.

Advertising