Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 606)

578 Unified IP MIB Reference
53-1002549-02
VLAN CAR objects
snVLanCARLimit
brcdIp.1.1.3.17.1.1.1.7
Syntax: Integer32 Read-only Shows the normal burst size in bytes. Normal burst size is the number of
bytes that are guaranteed to be transported by the network at the
average rate under normal conditions during the committed time
interval.
snVLanCARExtLimit
brcdIp.1.1.3.17.1.1.1.8
Syntax: Integer32 Read-only Shows the extended burst limit in bytes. The extended burst limit
determines how large traffic bursts can be before all the traffic exceeds
the rate limit.
snVLanCARConformActi
on
brcdIp.1.1.3.17.1.1.1.9
Syntax: Integer Read-only Indicates what happens to packets when the traffic is within the rate
limit:
•
continue(1) – Continue to evaluate the subsequent rate limits.
•
drop(2) – Drop the packet.
•
precedCont(3) – Rewrite the IP precedence and allow it after
evaluated by subsequent rate limits.
•
precedXmit(4) – Rewrite the IP precedence and transmit the
packet.
•
xmit(5) – Transmit the packet.
snVLanCARExceedActio
n
brcdIp.1.1.3.17.1.1.1.10
Syntax: Integer Read-only Indicates what happens to packets when the traffic exceeds the rate
limit:
•
continue(1) – Continue to evaluate the subsequent rate limits.
•
drop(2) – Drop the packet.
•
precedCont(3) – Rewrite the IP precedence and allow it after
evaluated by subsequent rate limits.
•
precedXmit(4) – Rewrite the IP precedence and transmit the
packet.
•
xmit(5) – Transmit the packet.
snVLanCARStatSwitche
dPkts
brcdIp.1.1.3.17.1.1.1.11
Syntax: Counter64 Read-only Indicates the number of packets permitted by this rate limit.
snVLanCARStatSwitche
dBytes
brcdIp.1.1.3.17.1.1.1.12
Syntax: Counter64 Read-only Indicates the number of bytes permitted by this interface.
snVLanCARStatFiltered
Pkts
brcdIp.1.1.3.17.1.1.1.13
Syntax: Counter64 Read-only Indicates the number of packets that exceeded this rate limit.
snVLanCARStatFiltered
Bytes
brcdIp.1.1.3.17.1.1.1.14
Syntax: Counter64 Read-only Indicates the number of bytes that exceeded this rate limit.
snVLanCARStatCurBurs
t
brcdIp.1.1.3.17.1.1.1.15
Syntax: Gauge32 Read-only Shows the current burst size of received packets.
Name, OID, and syntax Access Description