Snospfroutinginfonexthoprouteri d, Snospfroutinginfooutgoinginterfac e, Trap support objects – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual

Page 560: Snospfsettrap, Snospfconfigerrortype, Snospfpackettype, Snospfpacketsrc, Snospftrapsgenerationmode

Advertising
background image

532

Unified IP MIB Reference

53-1002549-02

Trap support objects

Trap support objects

The following table contains the support objects for the OSPF traps.

snOspfRoutingInfoNextHopRouterI
D
brcdIp.1.2.4.14.1.1.4
Syntax: RouterID

Read-only

Shows the ID or IP address of the next-hop destination
router.

snOspfRoutingInfoOutgoingInterfac
e
brcdIp.1.2.4.14.1.1.5
Syntax: Integer32

Read-only

Shows the outgoing interface of the destination router.

Name, OID, and syntax

Access

Description

Name, OID, and syntax

Access

Description

snOspfSetTrap
brcdIp.1.2.4.15.1
Syntax: OCTET STRING

Read-write Indicates if specific OSPF traps are enabled.

The four octets serves as a bit map for the trap events defined by the
OSPF traps. A value of 1 in the bit field indicates that the trap is
enabled. The right-most bit (least significant) represents Trap 0.

snOspfConfigErrorType
brcdIp.1.2.4.15.2
Syntax: Integer

Read-only

Indicates the potential types of configuration conflicts used by the
ospfConfigError and ospfConfigVirtError traps:

badVersion(1)

areaMismatch(2)

unknownNbmaNbr(3) – Router is eligible.

unknownVirtualNbr(4)

authTypeMismatch(5)

authFailure(6)

netMaskMismatch(7)

helloIntervalMismatch(8)

deadIntervalMismatch(9)

optionMismatch(10)}

snOspfPacketType
brcdIp.1.2.4.15.3
Syntax: Integer

Read-only

Indicates the OSPF packet type in the trap:

hello(1)

dbDescript(2)

lsReq(3)

lsUpdate(4)

lsAck(5)}

snOspfPacketSrc
brcdIp.1.2.4.15.4
Syntax: IpAddress

Read-only

Shows the IP address of an inbound packet that cannot be identified
by a neighbor instance.

snOspfTrapsGenerationMode
brcdIp.1.2.4.15.5
Syntax: RtrStatus

Read-write Indicates if this router has been enabled to generate OSPF traps:

disabled(0) – OSPF traps cannot be generated by this router,
even if the

“snOspfSetTrap”

object is set to generate traps.

enabled(1) – OSPF traps can be generated by the router.

This object provides global control on the generation of traps.

Advertising