Brocade Communications Systems RFS6000 - Manual (Page 102)

100 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
show
2
snmp-server
Common to all modes
Displays SNMP server information
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
show snmp-server traps wireless-statistics[mesh|wireless-client|
radio|wireless-controller|wlan]
Parameters
Example
RFController>show snmp-server traps
-------------------------------------------------------------------
Global enable flag for Traps N
-------------------------------------------------------------------
Enable flag status for Individual Traps
-------------------------------------------------------------------
Module Type Trap Type Enabled?[Y/N]
-------------------------------------------------------------------
snmp coldstart N
snmp linkdown N
snmp linkup N
snmp authenticationFail N
nsm dhcpIPChanged N
redundancy memberUp N
redundancy memberDown N
redundancy memberMisConfigured N
redundancy adoptionExceeded N
redundancy grpAuthLevelChanged N
misc lowFsSpace N
misc processMaxRestartsReached N
wireless station associated N
wireless station disassociated N
wireless station deniedAssociationOnCapability N
wireless station deniedAssociationOnShortPream N
wireless station deniedAssociationOnSpectrum N
wireless station deniedAssociationOnErr N
wireless station deniedAssociationOnSSID N
wireless station deniedAssociationOnRates N
wireless station deniedAssociationOnInvalidWPAWPA2IE N
wireless station deniedAssociationAsPortCapacityReached N
traps wireless-statistics
[mesh|
wireless-client| radio|
wireless-controller|wlan] Displays existing wireless-stats rate trap enabled flags
•
mesh – Displays existing mesh rate traps
•
wireless-client – Displays existing wireless client rate traps
•
radio – Displays existing radio rate traps
•
wireless-controller – Displays existing wireless controller rate
traps
•
wlan – Displays existing WLAN rate traps