Brocade Communications Systems RFS6000 - Manual (Page 719)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 717
53-1001931-01
RTLS config commands
21
rfid
RTLS config commands
Configures RFID reader parameters
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
NOTE
rfid
command instantiates
(config-rtls-rfid)
sub-instance. For more details see RFID
Instance on page 739 . The prompt changes from
RFController(config-rtls)#
to
RFController(config-rtls-rfid)
Syntax
rfid
Parameters
None
Example
RFController(config-rtls)#rfid
RFController(config-rtls-rfid)#