Brocade Communications Systems RFS6000 - Manual (Page 571)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 569
53-1001931-01
Radius configuration commands
19
RFController(config-radsrv-group)#
service
Radius configuration commands
Invokes RADIUS service commands (if they have been stopped). This command enables the
RADIUS server. A RADIUS restart is executed only from the
config
mode.
Syntax
service show cli
Parameters
None
Example
RFController(config-radsrv-group)#service show cli
Radius user group configuration mode:
+-clrscr [clrscr]
+-do
+-LINE [do LINE]
+-end [end]
+-exit [exit]
+-group
+-WORD [group WORD]
+-guest-group
+-enable [guest-group enable]
+-help [help]
.............................................................................
.............................................................................
...............................................
RFController(config-radsrv-group)#
show
Radius configuration commands
Displays current system information running on the controller
Syntax
show <paramater>
Parameters
Example
RFController(config-radsrv-group)#show ?
aap-wlan-acl wlan based acl
aap-wlan-acl-stats IP filtering wlan based statistics
access-list Internet Protocol (IP)
aclstats Show ACL Statistics information
alarm-log Display all alarms currently in the system
? Displays the parameters for which information can be viewed
using the show command