Brocade Communications Systems RFS6000 - Manual (Page 514)

512 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
DHCP Config commands
17
RFController(config-dhcp-class)#address range 11.22.33.44
config-dhcp-class
Use
(config-dhcp)# class
to enter the (
config-dhcp-class) instance
. Use this instance to
set an address range for a DHCP user class within a DHCP server address pool.
Table 18 summarizes
config-dhcp-class
commands.
address
config-dhcp-class
Sets an address range for a DHCP class within a DHCP server address pool
Syntax
address range <low IP Address> <high IP Address>
Parameters
Example
RFController(config-dhcp-class)#address range 11.22.13.14 11.22.33.56
RFController(config-dhcp-class)#
TABLE 18 config-dhcp-class commands
Command Description
address Sets an address range for a DHCP class in a DHCP server address pool
clrscr Clears the display screen
end Ends the current mode and moves to the EXEC mode
exit Ends the current mode and moves to the previous mode
help Displays the interactive help system in HTML format
no Negates a command or sets its defaults
service Assists in troubleshooting or debugging issues
show Displays running system information
range <low IP Address>
<high IP Address> Assigns an address range for the DHCP class
•
<low IP Address> – Defines the low IP address
•
<high IP Address> – Defines the high IP address