Brocade Communications Systems RFS6000 - Manual (Page 703)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 701
53-1001931-01
Wireless configuration commands
20
Syntax
detect-window
<duration> Configures the number of seconds for which information is
collected before analysis.Value in the range <5-300>
disable Disables WIPS without affecting configuration
wips events
80211-replay-check-failure|
ad-hoc-advertising-authorized-
ssid |
ad-hoc-network-violation-auth
orized-device
|ad-hoc-network-violation-una
uthorized-device
|aggressive-scanning |all|
ap-default-configuration |
ap-ssid-broadcast-in-beacon|
crackable-wep-iv-key-used |
decryption-failures |
dos-association-or-authenticat
ion-flood |
dos-broadcast-deauthenticati
on | dos-eapol-start-storm |
dos-unicast-deauthentication-
or-disassociation |eap-flood |
eap-nak-flood |
failures-reported-by-authentic
ation-servers | fake-ap-flood
|frames-from-unassociated-st
ations |
frames-with-bad-essids
|fuzzing-all-zero-mac-address-
observed
|fuzzing-invalid-frame-type-det
ected |
fuzzing-invalid-management-fr
ame|fuzzing-invalid-sequence
-number] Configures parameters related to the detection of anomalous
frames on the RF network. The parameters are:
•
80211-replay-check-failure – Detects 802.11 replay failure
•
ad-hoc-advertising-authorized-ssid – Detects ad-hoc
advertising authorized ssid
•
ad-hoc-network-violation-authorized-device – Enables ad-hoc
network violation authorized device
•
ad-hoc-network-violation-unauthorized-device – Enables
ad-hoc network violation unauthorized device
•
aggressive-scanning – Detects aggressive scanning
•
all – Enables all types of events
•
ap-default-configuration – Detects ap default configuration
•
ap-ssid-broadcast-in-beacon – Detects ap ssid broadcast in
beacon
•
crackable-wep-iv-key-used – Uses crackable wep iv key
•
decryption-failures – Detects decryption failures
•
dos-association-or-authentication-flood – Detects dos
association or authentication flood
•
dos-broadcast-deauthentication – Detects dos broadcast -
deauthentication
•
dos-eapol-start-storm – Detects dos eapol-start storm
•
dos-unicast-deauthentication-or-disassociation – Detects dos
unicast deauthentication or disassociation
•
eap-flood – Detects eap flood
•
eap-nak-flood – Detects eap-nak-flood
•
failures-reported-by-authentication-servers – Detects failures
reported by authentication servers