Brocade Communications Systems RFS6000 - Manual (Page 317)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 315
53-1001931-01
Global Configuration commands
5
network-element-id
Global Configuration commands
Use this command to set system’s network-element-ID
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
network-element-id <element-id>
Parameters
Example
RFController(config)#network-element-id test
RFController(config)#
<element-id> Specifies system’s network element ID