Brocade Communications Systems RFS6000 - Manual (Page 761)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 759
53-1001931-01
SOLE config commands
24
no
SOLE config commands
Disables the locationing adapter(s) and its configurations
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
no [aap-rssi-update-interval|locate|mobile-nit|redundancy|
rssi-filter]
Parameters
Example
RFController(config-rtls-sole)#no locate wireless-client enable
RFController(config-rtls-sole)#
RFController(config-rtls-sole)#no locate wireless-client interval
RFController(config-rtls-sole)#
aap-rssi-update-interval Disables AAP probe packet interval
locate
[aeroscout|ekahau|wireles
s-client] Negates Location commands
wireless-client
[<MAC-Addr|enable|interva
l <5-3600>] Locates specified wireless-client
•
<MAC-Addr> (enable) – Disables location of specified mobile
unit
•
enable – Disables location of all specified wireless clients
•
interval <5-3600> – Resets the location interval for the
locationing of clients
redundancy enable Disables SOLE redundancy
rssi-filter Disables rssi-filter value in dbm