Brocade Communications Systems RFS6000 - Manual (Page 489)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 487
53-1001931-01
Chapter
16
Extended MAC ACL Instance
In this chapter
• MAC Extended ACL config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487
• Configuring MAC Extended ACL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
Use the
(config-ext-macl)
instance to configure
mac access-list extended
ACLs. To
navigate to this instance, use the command:
RFController(config)#mac access-list extended <acl-name>
RFController(config-ext-macl)#
MAC Extended ACL config commands
Table summarizes
config-ext-macl
commands:
TABLE 16 MAC Extended ACL Config Command Summary
Command Description Ref.
clrscr Clears the display screen page 488
deny Specifies packets to reject page 489
end Ends the current mode and moves to the EXEC mode page 492
exit Ends the current mode and moves to the previous mode page 493
help Displays the interactive help system page 494
mark Specifies packets to mark page 495
no Negates a command or sets its defaults page 498
permit Specifies packets to forward page 499
service Invokes service commands to troubleshoot or debug the
(config-if)
instance configurations
page 502
show Shows running system information page 504