Brocade Communications Systems RFS6000 - Manual (Page 787)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 785
53-1001931-01
smart-rf config commands
25
recover
smart-rf config commands
Enables individual self-recovery features
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
recover [coverage-hole|interference|neighbor]
Parameters
Example
RFController(config-wireless-smart-rf)#recover coverage-hole enable
RFController(config-wireless-smart-rf)#recover interference enable
RFController(config-wireless-smart-rf)#recover neighbor enable
RFController(config-wireless-smart-rf)#
recover [coverage-hole|
interference|neighbor]
enable Enables individual self recovery features:
•
coverage-hole enable – Enables recovery from
coverage-hole errors
•
interference enable – Enables recovery from interference
errors
•
neighbor enable – Enables recovery from errors due to faulty
neighbor radios