Brocade Communications Systems RFS6000 - Manual (Page 737)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 735
53-1001931-01
ESPI config commands
22
no
ESPI config commands
Defines the name of the adapter or disables the adapter(s)
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
no adapter ale-tcp [enable|port <3000-3100>]
Parameters
Example
RFController(config-rtls-espi)#no adapter ale-tcp enable
RFController(config-rtls-espi)#
adapter ale-tcp [enable|port
<3000-3100>] Negates ESPI adapter configurations.
•
adapter – Application side Protocol implemented by adapter.
•
ale-tcp – ALE over TCP Adapter
•
enable – Deactivates/disables ESPI adapter
•
port <3000-3100>– Configure ESPI adapter
listening port