Brocade Communications Systems RFS6000 - Manual (Page 210)

208 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Priv Exec command
4
telnet
Priv Exec command
Opens a telnet session
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
telnet <IP> {<port>}
Parameters
Example
RFController#telnet 157.111.222.33
Entering character mode
Escape character is '^]'.
Red Hat Linux release 9 (Shrike)
Kernel 2.4.20-6bigmem on an i686
login: cli
Password:
telnet <IP> {<port>} Defines the IP address or hostname of a remote system
•
<port> - Optional. Displays TCP Port Number