Brocade Communications Systems RFS6000 - Manual (Page 280)

278 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
role
Global Configuration commands
Configures role parameters
NOTE
Opens the role configuration mode
(config-role)
to enable further configuration of the role. For
Avance Security Licence must be installed for Role Based Firewall to work. Please contact customer
support to purchase license for the same.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
role [<rolename>|assignment]
role <rolename> <priority>
role assignment immediate enable
Parameters
Usage Guidelines
To remove a role, use the command
{no} role <rolename> <priority>
Example
RFController(config)# role AccMgr 10
RFController(config-role)# ?
RFController(config)#role assignment immediate enable
RFController(config)#show role
role officeuser 10
authentication-type any
encryption-type any
ap-location exact "office"
essid office
client-mac any
group any
role globaluser 11
authentication-type any
role <rolename>
<priority> Creates a new role with the name <rolename> and with the priority
<priority> (range 1-10001). This moves to the role instance. For more
information see
Chapter 26, Role Instance .
role assignment
immediate enable Enables immediate role assignment and triggers role evaluation. This
is required when a new role is added or a role is modified.