Brocade Communications Systems RFS6000 - Manual (Page 61)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 59
53-1001931-01
show
2
show
Common commands
Displays the settings for the specified system component. There are a number of ways to invoke
the show command:
• When invoked without any arguments, it displays information about the current context. If the
current context contains instances, the show command (usually) displays a list of these
instances.
• When invoked with the display_parameter, it displays information about that component.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
show <parameter>
Parameters
Display
Parameters
Description Mode Example
autoinstall Displays the autoinstall configuration Common page 62
banner Displays the message of the day login
banner Common page 63
commands Displays command lists Common page 64
crypto Displays current encryption details Common page 65
environment Displays environmental information Common page 68
history Displays the session command history Common page 68
interfaces Displays the current interface status and
configuration Common page 69
ip Displays the internet protocol Common page 71
ldap Displays the LDAP server configuration Common page 76
licenses Displays the installed licenses, if any Common page 77
logging Displays the logging configuration and
buffer Common page 78
mac Displays the media access control IP
configuration Common page 79
mac-address-table Displays the MAC address table Common page 80
management Displays L3 management interface
name Common page 81
mobility Displays mobility parameters Common page 82
ntp Displays network time protocol
information Common page 84
port-channel Displays port channel commands Common page 85
power Displays power over ethernet command Common page 86
privilege Displays the current privilege level Common page 87