Brocade Communications Systems RFS6000 - Manual (Page 638)

636 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
mobility
Wireless configuration commands
Sets mobility parameters
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
mobility [enable|local-address|max-roam-period|peer]
mobility enable
mobility local-address <IP>
mobility max-roam-period <1-300>
mobililty peer <IP>
Parameters
Example
RFController(config-wireless)#mobility enable
RFController(config-wireless)#mobility local-address 12.12.12.1
RFController(config-wireless)#mobility max-roam-period 10
RFController(config-wireless)#mobility peer 157.208.235.108
RFController(config-wireless)#
enable Enables mobility globally
local-address <ip> Sets the local address for mobility
•
<IP> – IP address in A.B.C.D format
max-roam-period
<1-300> Sets the Max Roam Period for a wireless client (in seconds) to a
value in the range of 1 and 300.
peer <ip> Adds a peer to this mobility region
•
<IP> – IP address of the Peer in A.B.C.D format