Brocade Communications Systems RFS6000 - Manual (Page 609)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 607
53-1001931-01
Wireless configuration commands
20
ap-standby-attempts-threshold
Wireless configuration commands
Sets the number of attempts after which the standby controller starts adopting APs.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
ap-standby-attempts-threshold <attempts>
Parameters
Example
RFController(config-wireless)#ap-standby-attempts-threshold 100
RFController(config-wireless)#
<attempts> Sets the number of attempts to <attempts> in the range
5–200.