Brocade Communications Systems RFS6000 - Manual (Page 117)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 115
53-1001931-01
show
2
smart-rf
[calibration-status|
configuration|
history|radio] Displays smart-rf related management information
•
calibration-status – Displays smart-rf calibration status
•
configuration – Displays smart-rf configuration information
•
history – Displays smart-rf assignment history since last
calibration.
•
radio
[config|local-status|map|master-status|neighbors|spectru
m] {[<1-4096>|<MAC>|
all-11a|all-11bg]} – Displays smart-rf radio commands.
•
config – Displays the configuration information
•
local-status – Displays the local radio status related to
smart rf
•
map – Maps all 11a radios in the configuration
•
master-status – Displays the radio status from the
master radio list. If no parameter is passed, displays
status for all radios in the master list
•
neighbors – Displays the radio’s neighbor information
•
spectrum – Displays all 11a radios spectrum
information <1-4096> – The selected radio
•
<MAC> – The selected radio MAC address
•
all-11a – All 11a radios
•
all-11bg – All 11bg radios
unapproved-aps Defines unapproved APs seen by an access point or a wireless
client scan
wireless-controller-statistics
{detail} Displays wireless-controller statistics
•
detail – Optional Displays detailed wireless-controller
statistics
wlan [config|statistics] Displays wireless LAN parameters. The following information is
displayed:
•
config [<1-256>|all|enabled] – Displays the wireless LAN
configuration information. All parameters optional
•
<1-256> – The selected wlan
•
all – all wlans in the configuration
•
enabled – all wlans that are enabled. Configuration
information for disabled wlans are not displayed
•
statistics <1-256> – Displays the wireless LAN statistics for:
•
<1-256> {detail} – The selected wlan. Optionally display
details
wips
[configured-ap-def-essids|
configured-bad-essids|
fake-ap-flood|filter-list|
suspicious-ap] Displays wips parameters
•
configured-ap-def-essids – Displays the list of configured
default essids
•
configured-bad-essids – Displays the list of configured bad
essids
•
fake-ap-flood threshold – Displays fake-ap flood parameter
•
threshold – Fake-AP Flood Threshold
•
filter-list – Display the list of currently filtered mobile-units
•
suspicious-ap – Displays suspicious- ap parameters
•
signal-strength-threshold– Displays signal strength
threshold