Brocade Communications Systems RFS6000 - Manual (Page 749)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 747
53-1001931-01
RFID config commands
23
Parameters
Usage Guidelines
Use
[no] reader [<index>|<range>][options]
to rollback any configurations performed using
the
reader
command
Example
RFController(config-rtls-rfid)#reader 1 antenna 1 coordinates x 400 y 400 z
500
RFController(config-rtls-rfid)#
reader [<index>|
<reader-index-list>] Enter a single RFID reader index or a list (1,3,7) or
range ( 3-7) of RFID reader indices
antenna
[<antenna>|<antenna-list>]
coordinates x
<x-coordinate> y
<y-coordinate> z
<z-coordinate> Configures the RFID readers antenna. Select a antenna using its
index, between <1-8> or range (eg:3-7) of antenna indices or any
RFID reader antenna
•
coordinates - Sets the coordinates for the antenna
•
x <x-coordinate> – Configures the x coordinate for the
antenna for the RFID reader.
•
y <y-coordinate> – Configures the y coordinate for the
antenna for the RFID reader.
•
z <z-coordinate> – Configures the z coordinate for the
antenna for the RFID reader.
reader [<index>|
<reader-index-list>] antenna
[<antenna>|
<antenna-list>] power
<antenna-power> Configures the RFID reader power.
•
power – Sets the power
•
<antenna-power> – Sets the antenna power to between
<-63 and 63 dBm.
reader <index> id <ip> Sets the IP address <ip> for the reader with index <index>.
reader <index> coordinates
x
<x-coordinate> y
<y-coordinate>
z <z-coordinate> Sets the coordinates for the RFID reader.
•
coordinates - Sets the coordinates for the reader
•
x <x-coordinate> – Configures the x coordinate for the RFID
reader.
•
y <y-coordinate> – Configures the y coordinate for the RFID
reader.
•
z <z-coordinate> – Configures the z coordinate for the RFID
reader.
reader
[<index>|<reader-index-list
>] description <description> Sets the description of a RFID reader or a list of readers to
<description> (1-32 characters).
reader
[<index>|<reader-index-list
>] enable Enables or connects the RFID reader with the index <index> or a
list of RFID readers <reader-index-list>.
reader
[<index>|<reader-index-list
>] name <name> Sets a user friendly name to a RFID reader or a group of RFID
readers to <name> (1-20 characters).