Brocade Communications Systems RFS6000 User Manual
Page 655
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
653
53-1001931-01
Wireless configuration commands
20
short-gi enable
Enables the Short GI value for both the 20 MHz and the 40 MHz
channels for the 11n radio.
short-preamble
Enables support for the short preamble.
NOTE: This disables support for long preamble. Mobiles that only
support long preamble will not be able to associate.
speed
[1|11|12|18|2|24|
36|48|54|5p5|6|9|basic
1|
basic11|basic11a|
basic11an|basic11b1|
basic11b2|basic11bg|
basic11bgn|basic11g|
basic11gn|basic11n|
basic12|basic18|basic2|
basic24|basic36|basic48|
basic54|basic5p5|basic6|
basic9|range|throughput|
default]
Configures the basic and supported data rates/speed
•
1 1-Mbps
•
11 11-Mbps
•
12 12-Mbps
•
18
18-Mbps
•
2
2-Mbps
•
24
24-Mbps
•
36
36-Mbps
•
48
48-Mbps
•
54
54-Mbps
•
5p5
5.5-Mbps
•
6
6-Mbps
•
9
9-Mbps
•
basic1 basic 1-Mbps
•
basic11 basic 11-Mbps
•
basic11a rate set (6,12,24 Mbps)
•
basic11an rate set (6,12,24, MCS 0-7)
•
basic11b1 rate set (1 and 2 Mbps)
•
basic11b2 rate set (1,2,5.5,11 Mbps)
•
basic11bg rate set (1,2,5.5,11,6,12,24 Mbps)
•
basic11bgn rate set (1,2,5.5,11,6,12,24, MCS 0-7)
•
basic11g rate set (6,12,24 Mbps)
•
basic11gn rate set (6,12,24, MCS 0-7)
•
basic11n rate set (MCS 0-7)
•
basic12 basic 12-Mbps
•
basic18 basic 18-Mbps
•
basic2 basic 2-Mbps
•
basic24 basic 24-Mbps
•
basic36 basic 36-Mbps
•
basic48 basic 48-Mbps
•
basic54
basic 54-Mbps
•
basic5p5 basic 5.5-Mbps
•
basic6
basic 6-Mbps
•
basic9
basic 9-Mbps
•
default {mcs <msc-range>} – Factory default rates based on
radio-type.
•
throughput {mcs <msc-range>} – All rates basic (only
802.11g clients are allowed on 802.11bg radios).
•
range {mcs <msc-range>} – all rates enabled, the lowest one
set to basic
•
mcs – Configure the mcs rates / speed
•
MCS – A list or range (eg: 0-5, 10,15) of MCS rates
(0 to 15)
timeout <40-180>
The time out value in seconds for the selected radio.