Brocade Communications Systems RFS6000 - Manual (Page 721)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 719
53-1001931-01
RTLS config commands
21
Parameters
Usage Guidelines
service filter <1-100>
[action|length
<1-128>|mask|
memory-bank|name|offse
t<0-32>] Configures RFID tag filter
•
action [allow|deny] – Configures action for tag filter. By
default its configured to allow
•
length <1-128> – Configures number of bits to compare
against tag mask
•
mask <name> – Configures tag mask for filter
•
memory-bank [epc|tid|uid] – Configures tag memory bank
for the filter
•
epc – EPC memory bank
•
tid – TID memory bank
•
uid – UID memory bank
•
name <name> – Configures tag filter name
•
offset <0-32> – Configures first location of memory bank
against which the tag mask is compared
service inventory <1-100>
[duration <0-100000>|
filter{<1-100>|<name>}|re
port {current|differential}|
round <0-10>|start|
start-trigger|stop-trigger|zo
ne] A single tag inventory index
•
duration <0-100000> – Inventory period in msecs
•
filter [<1-100>|<name>] – Configures the selected tags
filter for inventory.
•
report – Set tag inventory report type
•
current – Reports current tag view
•
differential – Reports only the tags changed since
previous report
•
round <0-10> – Sets tag inventory round size
•
start – Starts tag inventory
•
start-trigger – Configures start trigger for tag inventory
•
gpi – Configures GPI event based start trigger
•
port <1-65535> – Configures GPI port number
•
event <0-1> – Configures a boolean GPI event
value that causes GPI event to trigger
•
timeout <0-65535> – Configures trigger1 timeout
in miliiseconds
•
immediate – Starts tag inventory immediately
•
periodic – Configures periodic tag inventory
•
offset <0-65535> – Configures time offset in
milliseconds
•
period <0-65535> – Configures time period in
milliseconds
•
stop-trigger – Configures stop trigger for tag inventory
•
duration <0-65535> – Configures duration in
milliseconds
•
gpi – Configures GPI event based start trigger
•
port <1-65535> – Configures GPI port number
•
event <0-1> – Configures a boolean GPI event
value that causes GPI event to trigger
•
timeout <0-65535> – Configures trigger timeout
in miliiseconds
•
immediate – Stops tag inventory immediately
•
zone <1-48> – Configures the selected logical reader
show cli Show running system information
•
cli – Show CLI tree of current mode