Brocade Communications Systems RFS6000 - Manual (Page 621)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 619
53-1001931-01
Wireless configuration commands
20
country-code
Wireless configuration commands
Sets the country of operation
All existing radio configurations will be erased
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
country-code <country-code>
Parameters
Usage Guidelines
Use the show wireless country code command to view the list of supported countries
Example
RFController(config-wireless)#country-code ?
WORD the 2 letter ISO-3166 country code ("show wireless country-code-list" to
see list of supported countries)
RFController(config-wireless)#country-code US
RFController(config-wireless)#
<country-code> Configures the controller to operate in a defined country.
<country-code> is the 2 letter ISO-3166 country code.