Brocade Communications Systems RFS6000 - Manual (Page 322)

320 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
wwan
Global Configuration commands
Configures wireless wan interface
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
NOTE
This command is not supported on the Mobility RFS7000 Controller.
Syntax
wwan [apn<STRING>|disable|enable|password<STRING>
|username<STRING>]
Parameters
Example
RFController(config)#wwan disable
RFController(config)#
RFController(config)#no wwan apn
RFController(config)#
apn <STRING> Enter the access point name provided by the service provider.
<STRING> – A string of up to 25 characters
NOTE: Use this command for countries in Europe. This command
is not valid for other countries.
disable Disables the wireless wan feature
enable Enables the wireless wan feature
password <STRING> Enter password provided by the service provider
<STRING> – A string of up to 30 characters
username <STRING> Enter username provided by the service provider
<STRING> – A string of up to 32 characters