Brocade Communications Systems RFS6000 User Manual
Page 48
46
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Common commands
2
diag [enable|identify|
limit|period|
tech-support-period|
tech-support-url]
Sets or displays controller diagnostic values
•
enable – Enables in-service diagnostics
•
fanduty <40-100> – CPU fan PWM duty cycle.
Set a value between 40-100%. Setting a value below 60 is
considered unreliable.
•
identify – Identifies a controller by flashing the LEDs
•
limit [buffer|fan|filesys|inodesload|maxFDs
|pkbuffers|procRAM|ram|routechache|temperature] –
Diagnostic limit commands
•
buffer [] – Configures the buffer usage warning limit.
The warning limit can be set to the buffer limit size of
[128|128k|16k|1k|256|2k|32|32k|4k|512|64|
64k|8k]
•
fan <1-3> low <1000-150000> – Sets the fan speed
limit for the fans on the controller.
•
low <1000-15000> – Sets limit value from 1000
to 15000
•
filesys [etc2|flash|var] – Sets the file system freespace
limit
•
inodes [etc2|flash|var] – Sets the file system inode
limit
•
load [01|10|15] – Aggregate processor load
•
maxFDs <0-32767> – Configures the maximum
number of file descriptors between 0 - 32767.
•
pkbuffers <0-65535>– Sets the packet buffer head
cache limit between 0 - 65535.
•
procRAM <0.0-100.0> – Configures the RAM space
used by a process. Set the percentage of RAM space
between 0.0 and 100.0 percent .
•
ram <0.0-25.0> – Configures the free space for the
RAM. Configure the free space between 0.0 and 25.0
percent.
•
routecache <0-65535> – Configures IP route cache
usage. Set between 0 and 65553.
•
temperature <1-6> [critical|high|low] – Sets the
number of temperature sensors for the controller.
•
critical <0.0 - 250.0> – Critical temperature limit
•
high <0.0 - 250.0> – high temperature limit
•
low <0.0 - 250.0> – low temperature limit
•
period <100-30000> – Configures the diagnostics period.
Set a value between 100-30000 milli seconds. The default
value is 1000 milliseconds
diag-shell
Provides diag shell access
encrypt[secret|2|
<pass-phrase>|
<encryption-key>]
Encrypt password or key with secret
•
secret – Encrypt passwords/keys with secret phrase
•
2 – Type of encryption SHA256-AES256
•
<pass-phrase> – Passphrase for encryption
•
<encryption-key> – Plaintext password or key to encrypt
firewall disable
Configures firewall parameters
•
disable – Disable firewall
kill connection {<1-64>}
Kills a connection using ESPI Adapter index
•
connection <1-64> – A single optional ESPI Adapter index