Brocade Communications Systems RFS6000 - Manual (Page 612)

610 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
auto-select-channels
Wireless configuration commands
Specifies a list of channels that will be used when automatic channel scan (ACS) and dynamic
frequency selection (DFS)
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
auto-select-channels [11a|11bg] [<channel-list>|
add <channel-list>|remove <channel-list>]
Parameters
Example
RFController(config-wireless)#auto-select-channels 11a 1,3,5
RFController(config-wireless)#
[11a|11bg]
[<channel-list>|
add <channel-list>|
remove <channel-list>] A comma separated list of 802.11a or 802.11bg channels
•
<channel-list> – a list of comma separated channels
•
add <channel-list> – adds <channel-list> channels to
existing list
•
remove <channel-list>– remove <channel-list> channels
from existing list