Brocade Communications Systems RFS6000 - Manual (Page 329)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 327
53-1001931-01
Chapter
6
Crypto-isakmp Instance
In this chapter
• Crypto ISAKMP config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
The (config-crypto-isakmp) instance is used to configure ISAKMP policies. To enter this
instance, use this command:
RFController(config)#crypto isakmp policy <1-10000>
RFController(config-crypto-isakmp)#
Crypto ISAKMP config commands
Table 6 summarizes
crypto-isakmp
commands
TABLE 6 Crypto-isakmp Instance
Command Description Ref.
authentication Sets the authentication scheme page 328
clrscr Clears the display screen page 329
encryption Sets the encryption algorithm page 330
end Ends the current mode and moves to the EXEC mode page 331
exit Ends the current mode and moves to the previous mode page 332
group Sets the Diffie-Hellman group page 333
hash Sets the hash algorithm page 334
help Provides a description of the interactive help system page 335
lifetime Sets the lifetime for the ISAKMP security association page 336
no Negates a command or sets its defaults page 337
service Defines the controllers service commands page 338
show Shows running system information page 339