Brocade Communications Systems RFS6000 - Manual (Page 151)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 149
53-1001931-01
show
2
wwan
Common to all modes
Configures wireless wan feature
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
show wwan [config|dns-server]
Parameters
Example
RFController#show wwan config
Access Point Name : isp.cingular
Auth-type: chap
Username : [email protected]
RFController#
RFController#show wwan dns-server
Preferred DNS server : 209.183.54.151
Alternate DNS server : 209.183.54.151
RFController#
RFController#show interfaces wwan
Interface wan
Hardware Type PPP, Interface Mode Layer 3
index=8, metric=1, mtu=1500, (PAL-IF)
<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>
inet 166.129.246.245/32 pointopoint 10.64.64.64
input packets 0, bytes 0, dropped 0, multicast packets 0
input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0
output packets 184, bytes 17618, dropped 0
output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0
collisions 0
RFController#
RFController#show ip interface brief
Interface IP-Address/Mask Status Protocol
me1 10.1.1.100/24 up down
vlan1 192.168.1.1/24 up up
vlan11 192.168.11.1/24 up up
vlan2 64.171.249.249/24 up up
wan 166.129.246.245/32 up up
RFController#
config Displays wwan signal configuration
dns-server Displays wwan DNS server addresses