Brocade Communications Systems RFS6000 - Manual (Page 805)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 803
53-1001931-01
Role config commands
26
authentication-type
Role config commands
Selects authentication type for the role
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
authentication-type [any|eq|neq]
authentication-type any
authentication-type eq [eap|hotspot|kerberos|mac-auth|none]
authentication-type neq[eap|hotspot|kerberos|mac-auth|none]
Parameters
Example
RFController(config-role)#authentication-type any
RFController(config-role)#
any Any type of authentication.
eq [eap|hotspot|kerberos|
mac-auth|none] Authentication type equals one of the following:
•
eap – Extensible Authentication Protocol
•
hotspot – Hotspot authentication
•
kerberos – Kerberos authentication
•
mac-auth – MAC authentication protocol
•
none – no authentication used
neq
[eap|hotspot|kerberos|
mac-auth|none] Authentication protocol does not contain one of the listed options.