Brocade Communications Systems RFS6000 - Manual (Page 93)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 91
53-1001931-01
show
2
Selfhealing RPs in this Group : Not Applicable
Selfhealing APs in this Controller : Not Applicable
Group maximum AP adoption capacity : Not Applicable
Controller Adoption capacity : Not Applicable
Established Peer(s) Count : Not Applicable
Redundancy Group Connectivity status : Not Applicable
DHCP Server in group : Not Applicable
RFController(config)#
RFController(config)#show redundancy group config
Redundancy Group Configuration Detail
Redundancy Feature : Disabled
Redundancy group ID : 1
Redundancy Mode : Primary
Redundancy Interface IP : 0.0.0.0
Number of configured peer(s) : 0
Heartbeat-period : 5 Seconds
Hold-period : 15 Seconds
Discovery-period : 30 Seconds
Handle STP : Disabled
Controller Installed License : 48
Controller running image version : 4.02.0
Auto-revert-period : 5 mins
Auto-revert Feature : Disabled
DHCP-Server Redundancy : Disabled
RFController(config)#
RFController(config)#show redundancy group runtime
Redundancy Group Runtime Information
Redundancy Protocol Version : 2.0
Redundancy Group License : 0
Cluster AP Adoption Count : Not Applicable
Controller AP Adoption Count : Not Applicable
Redundancy State : Disabled
Radio Portals adopted by Group : Not Applicable
Radio Portals adopted by this Controller : Not Applicable
Rogue APs detected in this Group : Not Applicable
Rogue APs detected by this Controller : Not Applicable
Clients associated in this Group : Not Applicable
Clients associated in this Controller : Not Applicable
Selfhealing RPs in this Group : Not Applicable
Selfhealing APs in this Controller : Not Applicable
Group maximum AP adoption capacity : Not Applicable
Controller Adoption capacity : Not Applicable
Established Peer(s) Count : Not Applicable
Redundancy Group Connectivity status : Not Applicable
DHCP Server in group : Not Applicable
RFController(config)#