Select-channels, Select-channel s – Brocade Communications Systems RFS6000 User Manual
Page 792
790
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
smart-rf config commands
25
select-channels
Selects a list of channels for Automatic Channel Scan and Smart RF
Use this command to add channels or remove them from the channel list.
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax
select-channel [<WORD>|add<WORD>|remove <WORD>]
Parameters
Example
RFController(config-wireless-smart-rf)#select-channels 1,2,15-17
RFController(config-wireless-smart-rf)#select-channels add 1,2,15-17
RFController(config-wireless-smart-rf)#select-channels remove 1,2,15-17
RFController(config-wireless-smart-rf)#
<WORD>
A comma separated list of channel numbers.
add <WORD>)
Add a channel or a list of channels to the channel list.
remove <WORD>
Remove a channel or a list of channels from the channel list