Brocade Communications Systems RFS6000 - Manual (Page 373)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 371
53-1001931-01
Chapter
10
Crypto-map Instance
In this chapter
• Crypto Map config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371
The (
config-crypto-map)
commands define a Certificate Authority (CA) trustpoint. This is a
separate instance, but belongs to the
crypto pki trustpoint
mode under the
config
instance.
To navigate to this instance, use the command:
RFController(config)#crypto map <map-name> <sequence>
[ipsec-isakmp|ipsec-manual] {dynamic}
RFController(config-crypto-map)#
Crypto Map config commands
Table 10 summarizes
config-crypto-map
commands:
TABLE 10 Crypto Map Command Summary
Command Description Ref.
clrscr Clears the display screen page 372
end Ends the current mode and moves to the EXEC mode page 373
exit Ends the current mode and moves to the previous mode page 374
help Describes the interactive help system page 375
match Assigns an IP access-list to a crypto map definition page 376
no Negates a command or set its defaults page 378
service Invokes service commands to troubleshoot or debug the
instance configurations page 379
set Sets values for encryption/decryption parameters page 380
show Displays the running system information page 384