Brocade Communications Systems RFS6000 - Manual (Page 53)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 51
53-1001931-01
Common commands
2
smart-rf
[clear-history|load-from-file|
replay|rescue|restore|save
-to-file|simulate] Displays Smart-RF Management Commands
•
clear-history– clears assignment history
•
load-from-file – load record from file
•
replay enable – set replay mode
•
enable – enable replay mode
•
rescue <MAC> – force rescue operation
•
<MAC> – A single radio-mac-address, a single index
•
restore <MAC> – remove any recovering operation on given
mode
•
<MAC> – A single radio-mac-address a single index
•
save-to-file – save records to file smart.bin
•
simulate [coverage-hole|interference] – Simulate radio
events
•
coverage-hole <1-4096> – Simulate coverage hole
•
experienced-rate transmit-rate – Provide the
experienced rate in mbps
•
transmit-rate [patter-11a|pattern-11b|
pattern-11bg|pattern-2-mbps] – Provide the
simulated clients’s allowed transmit rates in
hexadecimal format
•
pattern-11a – 11a Unit
•
pattern-11b – 11b Unit
•
pattern-11bg – 11bg Unit
•
pattern-2-mbps – 2 Mbps Unit
•
interference <MAC> – Simulate interference on radio
•
<MAC> – A single radio-mac-address, a single
index
start-shell Provides shell access
test Provides test parameters
undefine ecspec
<SPECNAME> Undefines non active Event Cycle Specification
•
ecspec <SPECNAME> – Name of ECSpecs configuration
watchdog Enables the controller watchdog