Brocade Communications Systems RFS6000 - Manual (Page 728)

726 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
RTLS config commands
21
zone
RTLS config commands
Configures the zone. Maximum of 16 zones can be configured for a site
.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
zone <1-48> [name <name>|perimeter x
<0-65535>
y <
<0-65535> ]
Parameters
Usage Guidelines
Use
{no} zone <index> [options]
to negate a zones configurations
Example
RFController(config-rtls)#zone 1 name yard
RFController(config-rtls)#
RFController(config-rtls)#zone 1 perimeter x 0 y 0
RFController(config-rtls)#
RFController(config-rtls)#zone 1 perimeter x 40 y 0
RFController(config-rtls)#
RFController(config-rtls)#zone 1 perimeter x 40 y 100
<1-48>name
<name>|perimeter x
<0-65535> y <<0-65535> ] Select a single zone index for configuration
•
name <name> – Configures name of new zone
•
perimeter [x y]– Configures zone perimeter coordinates
•
x <0-65535> – Defines X coordinate
•
y <0-65535> – Defines Y coordinate