Brocade Communications Systems RFS6000 - Manual (Page 171)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 169
53-1001931-01
Chapter
4
Privileged Exec Commands
In this chapter
• Priv Exec command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Most PRIV EXEC commands set operating parameters. Privileged-level access should be password
protected to prevent unauthorized use. The PRIV EXEC command set includes commands
contained within the USER EXEC mode. The PRIV EXEC mode also provides access to configuration
modes, and includes advanced testing commands.
The PRIV EXEC mode prompt consists of the host name of the device followed by a pound sign (#).
To access the PRIV EXEC mode, enter the following at the prompt:
RFController>enable
RFController#
The PRIV EXEC mode is often referred to as the enable mode, because the
enable
command is
used to enter the mode. There is no provision to configure a password to get access to PRIV EXEC
(enable) mode.
Priv Exec command
Table 4 summarizes the controller PRIV EXEC commands:.
TABLE 4 Priv Exec Commands
Command Description Ref.
acknowledge Acknowledges alarms page 171
archive Manages archive files page 172
cd Changes the current directory page 174
change-passwd Changes the password of the logged user page 175
clear Resets controller functions to last saved configuration page 176
clock Configures the software system clock page 179
clrscr Clears the display screen page 32
cluster-cli Displays the cluster context page 180
configure Enters the configuration mode page 181
copy Copies content from one file to another page 182
debug Displays debugging functions page 183
delete Deletes a specified file from the system page 188
diff Displays differences between two files page 189
dir Lists the files on a filesystem page 190
disable Turns off privileged mode command page 191