Brocade Communications Systems RFS6000 - Manual (Page 566)

564 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Radius configuration commands
19
end
group
Ends and exits the current mode and changes to the PRIV EXEC mode. The prompt changes to
RFController#
Syntax
end
Parameters
None
Example
RFController(config-radsrv-group)#end
RFController#
exit
group
Ends the current mode and moves to the previous mode
(config-radsrv)
). The prompt changes
to
RFController(config)#
.
Syntax
exit
Parameters
None
Example
RFController(config-radsrv-group)#exit
RFController(config-radsrv)#group
group
group
Establishes RADIUS user group parameters. This command creates a group within the existing
RADIUS group
Syntax
group <group-name>
Parameters
Example
RFController(config-radsrv-group)#group TestGroup
RFController(config-radsrv-group)#
<group-name> Defines the RADIUS group name