Brocade Communications Systems RFS6000 - Manual (Page 780)

778 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
smart-rf config commands
25
Parameters
assignable-power-range
<4-20> <4-20> Negates the power range assignment.
auto-assign [all |channel
|detector|power|rescuer]
enable Negates the auto-assign commands
•
all - Disables all auto-assignment features
•
channel enable – Disables channel assignments
•
detector enable – Disables detector assignments
•
power enable – Disables power assignments
•
rescuer enable – Disables rescuer assignments
extensive-scan enable Disables the extensive scan mode
hold-time <30-65535> Disables hold-time for interference avoidance. Set the value in
seconds from 30-65535.
number-of-rescuers Reverts to the default number of rescuers to cover faulty radio
radio [<1-4096>|
MAC- Address|RADIO|
all-11a|all-11b|all-11bg] Negates all radio related commands.
•
<1-4096> – For each of the radio, the following values are
negated or reset:
•
antenna-gain <GAIN> – Resets the set antenna gain
value.
•
coverage-rate
[1|2|5p5|6|9|11|12|18|24|36|48|54 ] – Resets
the selected coverage rate value.
•
lock-auto-assign [all | channel | detector | power |
rescuer] – Resets the lock auto assign value.
•
radio-mac [AA-BB-CC-DD-EE-FF] – Resets the selected
Radio MAC address
•
rescuer [AA-BB-CC-DD-EE-FF | all] – Resets the selected
rescuer MAC address or resets all the rescuers.
•
AA-BB-CC-DD-EE-FF – For the selected Radio MAC, the
following parameters are negated or reset.
•
antenna-gain <GAIN> – Resets the set antenna gain
value.
•
coverage-rate
[1|2|5p5|6|9|11|12|18|24|36|48|54] - Resets
the selected coverage rate value.
•
lock-auto-assign [all | channel | detector | power |
rescuer] – Resets the lock auto assign value.
•
RADIO – A list of radio index values such as 1,3,5 or 3-7 the
following parameter values are negated or reset