Brocade Communications Systems RFS6000 - Manual (Page 120)

118 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
show
2
RFController(config)#show wireless config
country-code : None
secure-wispe-default-secret default
adoption-pref-id : 1
proxy-arp : enabled
adopt-unconf-radio : enabled
dot11-shared-key-auth : disabled
ap-detection : disabled
manual-wlan-mapping : disabled
dhcp sniff state : disabled
dhcp one portal forward : enabled
dhcp fix broadcast-rsp : disabled
broadcast-tx-speed : optimize-for-range
wlan bw allocation : disabled
smart-channels used :
smart-channels excluded :
Adaptive ap parameters:
config-apply def-delay : 30 seconds
config-apply mesh-delay: 3 minutes
wired-to-wireless rate limit per user : unlimited
wireless-to-wired rate limit per user : unlimited
user load balance mode : by-count
secure-wispe-default-secret : default
admission control for voice : enabled
cluster-master-support : enabled
RFController(config)#
RFController(config)#show wireless config
country-code : us
adoption-pref-id : 1
proxy-arp : enabled
adopt-unconf-radio : enabled
dot11-shared-key-auth : disabled
ap-detection : enabled
manual-wlan-mapping : enabled
dhcp sniff state : disabled
dhcp one portal forward : disabled
dhcp fix broadcast-rsp : disabled
broadcast-tx-speed : optimize-for-range
wlan bw allocation : disabled
smart-channels used : 1,6,11,36,40,44,48,52,56,60,64,100,104,
108,112,116,136,140,149,153,157,161,165
smart-channels excluded : 2,3,4,5,7,8,9,10
Adaptive ap parameters:
config-apply def-delay : 30 seconds
config-apply mesh-delay: 180 seconds
user load balance mode : disabled
secure-wispe-default-secret : 0 defaultS
admission control for voice : disabled
cluster-master-support : enabled
nas-id : ""
nas-port-id : ""
wired-to-wireless rate limit per user : unlimited
wireless-to-wired rate limit per user : unlimited
RFController(config)#
RFController>show wireless ids
Detect-window : 60 seconds