Ap-udp-port – Brocade Communications Systems RFS6000 User Manual
Page 611
Advertising
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
609
53-1001931-01
Wireless configuration commands
20
ap-udp-port
Wireless configuration commands
Configures the UDP port for layer 3 adoption of APs
You also need to configure the DHCP server providing the APs the same parameter.
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax
ap-udp-port <port>
Parameters
Example
RFController(config-wireless)#ap-udp-port 20
RFController(config-wireless)#
<port>
Sets the port number for layer 3 adoption of APs. <port> is a value
in the range 1-65535.
Advertising