Brocade Communications Systems RFS6000 - Manual (Page 701)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 699
53-1001931-01
Wireless configuration commands
20
dot11k
Wireless configuration commands
Displays dot11k related commands
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
dot11k send-beacon-req [<1-8192>|CLIENT|client]
dot11k send-beacon-req <1-8192> measurement-duration <100-10000>
dot11k send-beacon-req [client|CLIENT] <MAC> measurement-duration <100-10000>
Parameters
Example
RFController(config-wireless)#dot11k send-beacon-req 9 measurement-duration
777
RFController(config-wireless)#
dot11k send-beacon-req
[<1-8192>|CLIENT|client] Triggers the Beacon request send
•
<1-8192> – A single client index
•
CLIENT – A list (eg: 1,3,7) or range (eg: 3-7) of client indices
•
client – client’ss MAC address
•
MAC – Mac address in AA-BB-CC-DD-EE-FF format
•
measurement-duration <100-10000> – Specifies
measurement duration in TUs
•
<100-10000> – Specifies range of measurement
duration