Brocade Communications Systems RFS6000 - Manual (Page 576)

574 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Radius configuration commands
19
ldap-server
Radius configuration commands
Sets the LDAP server configuration
It uses the existing external database (active directory with the onboard RADIUS server) instead of
the local database on the controller.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
ldap-server [primary|secondary] host <IP>
ldap-server primary host <IP> port <1-65535>
login <user-name> bind-dn <distinguished-name> base-dn
<distinguished-name> passwd {<password>|<password>
|<password>} passwd-attr <password-attribute>
group-attr <group-attribute> group-filter
<group-filter> group-membership <group> net-timeout <1-10>
ldap-server secondary host <IP> port <1-65535> login <user-name> bind-dn
<distinguished-name> base-dn <distinguished-name> passwd
{<password>|<password>|
<password>} passwd-attr <password-attribute>
group-attr <group-attribute> group-filter <group-filter> group-membership
<group> net-timeout <1-10>