Brocade Communications Systems RFS6000 - Manual (Page 464)

462 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Extended ACL config commands
14
no
Extended ACL config commands
Negates a command or sets its defaults
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
no [deny|mark|permit]
Parameters
Usage Guidelines
Removes an access list control entry. Provide the rule-precedence value when
using the no command.
Example
RFController(config-ext-nacl)#no mark 8021p 5 tcp 192.168.2.0/24 any
rule-precedence 10
RFController(config-ext-nacl)#
RFController(config-ext-nacl)#no permit ip any any rule-precedence 10
RFController(config-ext-nacl)#
RFController(config-ext-nacl)#no deny icmp any any rule-precedence 10
RFController(config-ext-nacl)#
deny Specifies packets to reject
mark Specifies packets to mark
permit Specifies packets to forward