Brocade Communications Systems RFS6000 User Manual
Page 599
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
597
53-1001931-01
Wireless configuration commands
20
ap
Wireless configuration commands
Defines the name, location and other parameters of access points
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax
ap
[<1-256>|<LIST>|<MAC-ADDRESS>] [ABG Scan|aap-log-storage|aap-admin-passwd|
||adoption-policy|
|aap-ipfilter-list|aap-lan1-ipf-rules
|aap-lan1-trunking|aap-syslog-srvr|country-code|lan-acl|location|name|radio-c
onfig|secure-mode||secure-mode-staging]
ap <1-256> aap-admin-passwd <LINE>
ap <1-256> aap-log-storage enable
ap <1-256> aap-syslog-srvr enable level <0-7> ipaddr
ap <1-256> adoption-policy [allow|deny]
ap <1-256> country-code <country-code>
ap <1-256> leds (enable)
ap <1-256> location <location>
ap <1-256> name <name>
ap <1-256> secure-mode [enable|secret [0 <secret>|2 <secret>|<secret>]
ap <1-256> secure-mode-staging enable
ap <1-256> aap-ipfilter-list <AAP-IPFiltername>
ap <1-256> aap-lan1-ipf-rules [in|out] {<1-20>|<AAP_IP_RULE>}
ap <1-256> aap-lan1-trunking [disable|enable mgmt-vlan-id
<1-4094> native-vlan-id <1-4094> native-tagging [tagged|untagged]]
ap <LIST> adoption-policy [allow|deny]
ap <LIST> aap-log-storage enable
ap <LIST> aap-syslog-srvr enable level <0-7> ipaddr
ap <LIST> country-code <country-code>
ap <LIST> leds (enable)
ap <LIST> location <location>
ap <LIST> name <name>
ap <LIST> secure-mode [enable|secret [0 <secret>|2 <secret>|<secret>
ap <LIST> secure-mode-staging enable
ap <MAC-ADDRESS> aap-admin-passwd
ap <MAC-ADDRESS> adoption-policy [allow|deny]
ap <MAC-ADDRESS> aap-log-storage enable
ap <MAC-ADDRESS> aap-syslog-srvr (enable)(level)<0-7> <ipaddr>
ap <MAC-ADDRESS> country-code <country-code>
ap <MAC-ADDRESS> location <location>
ap <LIST> leds (enable)
ap <MAC-ADDRESS> name <name>
ap <MAC-ADDRESS> secure-mode [enable|secret [0 <secret>|2 <secret>|<secret>]
ap <MAC-ADDRESS> secure-mode-staging enable